Appearance
The thread is compatible with the fabric, including color, texture, fastness, shrinkage and other aspects. The color of the button should be equal to the color of the fabric. The products are neat, flat, foldable, symmetrical, all parts are flat ironed, no leaks, no dead wrinkles, no ends, no yarns and hairs, and all parts meet the standard requirements.
Sewing
There are many types of fabrics. In order to ensure the appearance and firmness of the product, different stitch lengths should be selected for different fabrics. For example, the stitch length of hard fabrics can usually be thinner, and the stitch length of soft fabrics can usually be denser.
Straight-line means that the lines of each sewing part must not be twisted at will, and must meet the needs of the appearance of the garment; the line must be regular, not stacked, no skipped stitches, no throwing lines, clear and beautiful stitches, and the sewing start and end stitches must be strong .
The length of the lap thread should be suitable, and there should be no missing stitches or off-line appearance. The elasticity of the stitching should be compatible with the thickness and texture of the fabric.
Chromatic aberration
The color difference rule is the demand for materials, that is, the demand for clothes fabrics. According to the relevant national regulations on color difference, the upper collar, bag fabric, and side seams of the trousers are the primary parts. The color difference is higher than grade 4, and the other appearance parts are grade 4. Grade 5 represents the best fastness to fading, and the color difference is equal to zero. Grade 4 to Grade 1 represents the relative increasing degree of fading, and Grade 1 indicates the most severe.
Size
The size of custom-made clothing is the primary standard for the company’s work clothes inspection. Since it is tailor-made, it is naturally required to be more fit and comfortable than the ready-to-wear clothing purchased in the shopping mall. It is suitable for job requirements. It is particularly important to be loose and moderate.
Defects
In the standard rules, each independent part only promises to have a defect, that is, there is a defect on the garment piece, and no defect is allowed on the patch pocket and the bag cover in this independent part. The types of defects are different for different fabrics. Punctuality must be carried out in accordance with the normative rules.